Hier die daten von Ch.Beck!
General Specifications
Item LH RH Total/Split
Alignment Specifications — E-150
Caster 4.0° ± 2.75° 4.5° ± 2.75° -0.5° ± 1.0°
Camber 0.25° ± 0.5° 0.25° ± 0.5° 0° ± 0.5°
Toe (Positive value is toe-in, negative value is toe-out)
— — 0.06° ± 0.25°
Alignment Specifications — E-250 and E-350
Caster 4.0° ± 2.75° 4.5° ± 2.75° -0.5° ± 1.0°
Camber 0.5° ± 0.5° 0.5° ± 0.5° 0° ± 0.5°
Toe (Positive value is toe-in, negative value is toe-out)
— — 0.06° ± 0.25°
Alignment Specifications — E-Super Duty
Caster 4.0° ± 2.75° 4.5° ± 2.75° -0.5° ± 1.0°
Camber 0.5° ± 0.5° 0.5° ± 0.5° 0° ± 0.5°
Toe (Positive value is toe-in, negative value is toe-out)
— — 0.06° ± 0.25°
General Specifications
Item
Specification
Dogtracking — Maximum (Centerline of front tires compared to centerline of rear tires) 30 mm (1.25 in.)
Clear Vision
Clear Vision (Negative value is counterclockwise) 0° ± 3°
Ball Joint Radial Play
Lower Ball Joint — Maximum 0.8 mm (1/32 in.)
Upper Ball Joint — Maximum 0.8 mm (1/32 in.)
Vehicle Lean (Side-to-Side Height Differences)
Front Wheel Opening — Maximum 15 mm (5/8 in.)
Rear Wheel Opening — Maximum 20 mm (3/4 in.)
Normal ist das ne tabelle:-(
Gruß Darius